Comfort Rim Classical Series

$99.00$119.00

Everything you love about the Classical Series but now with the Comfort Rim (CR).

The Classical Series was designed with every player in mind. All of these pieces feature a 27 throat but vary in rim size, rim design, and cup design. Every one of these have been created through extensive play testing in studio and live settings and are optimized for richness in sound and efficiency in playability. The entire Classical Series can be ordered “top only” for pairing with cornet, regular trumpet, or short-shank trumpet back-bores.

Detailed descriptions of each mouthpiece can be found below.

SKU: N/A Category:

Description

CR1.5C 

Modeled after an extremely comfortable Bach Mt. Vernon 1 1/2C. This mouthpiece was designed to not “feel” quite as big. But it still is a good size piece. The rim is much more comfortable than most new big mouthpieces on the market today. It has a 27 hole and the back-bore is designed to give a full round dark sound. Even when pushed the sound quality stays the same. The idea was to have a mouthpiece that was very dark and round, and when pushed, had some brilliant qualities without being “edgy” or “nasal” in it’s nature. 1.5C: 0.6703 inner diameter measured at 0.030″    0.1440 throat    27 drill    1.0743 outside diameter

CR3C 

This mouthpiece was modeled after an early Elkhart model Bach 3C. The rim is very comfortable for hours of playing. The hole size, and back-bore are the same as the 1 1/2. The playing and sound characteristics are very similar to the 1 1/2, but with a slightly smaller inner-diameter.

3C: 0.6657 inner diameter measured at 0.030″ 0.1440 throat 27 drill 1.0659 outside diameter

CR3B

The CR3B  has a 27 hole, and our classical back-bore. The cup has more overall volume than a 3C. We used a B cup design, but from a slightly smaller mouthpiece so that the player would not lose endurance. The mouthpiece is has a warmer sound, is quick responding, and is very comfortable. Many players have concluded that they have not lost endurance or range verses using a 3C size mouthpiece. If you’re looking for a warm classical piece with a big sound that is easy to play, try this one!

CR5B

The 5B is loosely based on an early Elkhart Bach 6B. Many players playing a mouthpiece of this size switch back and forth between a small mouthpiece and a bigger one, so this piece was designed with them in mind. The cup is a little deeper than the 1 1/2 and the 3. It also has the same back-bore and hole size as the 1 1/2 and the 3 so it retains similar characteristics, but with a slightly more compact darker sound.

5B: 0.6521 inner diameter measured at 0.030″ 0.1440 throat 27 drill 1.0603 outer diameter

CR5.3C 

The 5.3C has the same rim as my 5Z (Severinsen model). It has a 27 hole, and the standard classical back-bore. The major difference of my 5.3C model and other manufacturers, is that I incorporate the 3C cup in my 5.3C, giving it more body and the actual cup more overall volume for a big round sound. You still retain the benefit of the smaller rim size, but without giving up the sound of the bigger mouthpiece.

5.3C: 0.6521 inner diameter measured at 0.030″ 0.1440 throat 27 drill 1.0603 outer diameter

CR7.1B 

This mouthpiece has a slightly flatter rim contour and is extremely comfortable. It was developed in my search for a good classical mouthpiece to use when I play symphony work. Quite a bit of my playing is done on a much smaller diameter with a different rim, so this mouthpiece facilitates that type of switch. It has a deep cup from a Bach 1B, but the rim inner diameter is closer to a 7. The cup is deeper than the 1 1/2 and the 3. It also has the same back-bore and hole size as the 1 1/2 and the 3 so it retains similar characteristics, but with a darker sound.

7.1B 0.632″ OD 1.068″ 27 throat

CR7.3C 

This mouthpiece has a slightly flatter rim contour and is extremely comfortable. It was developed in my search for a good classical mouthpiece to use when I play symphony work. Quite a bit of my playing is done on a much smaller diameter with a different rim, so this mouthpiece facilitates that type of switch. It has a deep cup from the PATRICK 3C, but the rim inner diameter is closer to a 7. It also has the same back-bore and hole size as the 1 1/2 and the 3 so it retains similar characteristics.

7.3C 0.632″ OD 1.068″ 27 throat

CR10.5C 

This mouthpiece is modeled after one of the first Bach New York 10 1/2 C’s ever made. (It was made sometime in the late 1920’s!) The hole size is a 27, and the back-bore is slightly brighter than the 1 1/2, 3, and 5.

It is extremely comfortable and does not feel very small. It makes a wonderful all around mouthpiece and also a great piccolo or Eb trumpet mouthpiece. It also lends itself for those switching back and forth from a smaller commercial mouthpiece.

Band directors – I HIGHLY recommend starting your young players on this mouthpiece. Because of the size and shape, it will help them to get a good sound right away and to not develop any bad habits from straining on a mouthpiece that is too big.

10.5C: 0.6634 inner diameter measured at 0.030″    0.1440 throat    27 drill    1.0587 outer diameter

CR10.3C 

The 10.3 C is our favorite combination in this rim diameter for a well-rounded classical mouthpiece. The 10.3C features our 10 rim diameter with the same cup shape found on our 3C. This mouthpiece is well suited for a player who prefers a smaller rim diameter, while looking for a classical cup shape. The 27 throat and classical back-bore match the rest of the classical line like the 1.5C, 3C, 5.3C and 7.3C.

Additional information

Size

CR1.5C, CR3C, CR3B, CR5B, CR5.3C, CR7.1B, CR7.3C, CR10.5C, CR10.3C

One Piece or Top Only

One Piece, Top Only